TopXGun

Members
  • Content count

    7
  • Joined

  • Last visited

Community Reputation

0 Neutral

About TopXGun

  • Rank
    Newbie
  1. T1-A Introduction T1- A is a mature flight controller for agricultural UAV. It provides rich and practical function that can meet the multiple requirements of the current agricultural UAV. By the integration of high precision sensor, the application of advanced industrial precision calibration algorithm as well as reasonable intelligent operation mode, the more efficient, accurate and convenient way of plant protection work can be realized. Install T1-A Step 1. Confirm multi-rotor type, forward direction and rotation direction of the motor/propeller. Step 2. Install the controller unit, connect every part. Installation and requirements FCU:The TopXGun logo should be facing the sky, with the orientation arrow pointing directly to the nose direction, please mount it on a barycenter place in board center of aircraft. PMU:Please do not mount it on any other electronic device, choose a ventilated place for cooling. Make sure the three CAN ports are convenient for connecting during installation. GPS/Compass:When installing the top side should be facing up, with the orientation arrow should be consistent with the FCU arrow direction, pointing directly to the nose direction. Mount it on the bracket horizontally. Connect it to any one of the CAN ports of PMU. It is recommended to use bracket included in package, otherwise, please make sure it is nonmagnetic. LIU:Mount in a good place to make sure the LIU is visible during flying, don't cover the USB port, connect it to any one of the CAN ports of PMU with the enclosed 3M adhesive tape. DCU:Choose the appropriate position on aricraft board and connect it to any one of the CAN ports of PMU. FIRU:Let the side printed with FIRU up and use together with GPS. Port Description FCU DCU FIRU Line connection diagram Test Setting the parameters according to the instructions of the parameter adjustment software. Calibration ESC Calibration Step 1: Push the throttle lever to the fully up position. Now the status light indicates the current GPS mode and flight mode. Step 2: Flip the CH5 switch from the fully up to the fully down positions for around 6—10 times, until the status light changes to solid red. Step 3: Keep the throttle position unchanged, disconnect the main power, and then recharge it. Now the status light blinks red, green and blue once. Step 4: Around 0.5 second after power on, you will hear motor beep-beep for twice, now pull the throttle lever to the fully down position within 2 seconds. The status light will blink red and blue alternately, then go back into normal instruction. Compass Calibration Horizontal Calibration Step 1: Put the drone on horizontal ground, ensure the body without vibration. Step 2: Make it perform toe-out locking action for 10 seconds, until the blue and green lights blink alternately. Step3: Loose the remote control lever. About 10 seconds later, there is only blue light blinks. About 15 seconds later, lights blink normally. Usage Please update the firmware before use. For updating firmware methods, see the T1-A user manual. Unlock (left) and lock (right) Fly Test Double check the items by following steps before flight, ensure safe flight. Step 1 Check before flight
  2. With the gradual maturity of UAV technology, the application of civil UAV is expanding. From search and rescue to observation and surveillance, aerial photography to traffic patrol, the X30GT has emerged as the time requires. With 12 million pixels, the 30x optical zoom telephoto camera is portable and quick to install. 1/1.8CMOS and 12 million effective pixels make the picture extremely clear. The 30x optical zoom lens can clearly capture the distant details, not only provide static photos, but also support for full HD video recording, which fully meets the need of industrial applications. The X30GT’s three-axis PTZ provides stability and accuracy up to 0.008. With the Rainbow R1 data chain, the X30GT can view shooting pictures and operate on the computer and pad in real-time. 8km transmission distance has greatly improved the operational radius and efficiency. Clicking on the picture can quickly lock and automatically enlarge the target. When the background is complex, the tap-zoom function enables the operation easier and simpler. The latest fully automatic tracking mode enables the X30GT to autonomously track the target within the selected area. With its high-quality image capturing ability and stable working condition, the X30GT can make the work more efficient and secure so that it can provide detailed images to support the various industries.
  3. In November 15th, the 2017 Global Mobile Broadband Forum, jointly sponsored by HUAWEI, GSMA and GTI, was opened in London, UK. More than 1400 representatives from global operators, vertical industries, industrial organizations attended the event. In this forum, unmanned aerial vehicles as a new industry has been the attention of all walks of life. TopXGun Robotics joined hands with HUAWEI X Labs, developed the latest unmanned aerial vehicle and has attracted the attention of the whole audience. This drone owns two innovation functions, i.e., 4.5G BLOS UAV control technology and thermal image transmission. The 4.5G can be used for BLOS control and thermal imaging video transmission in real time. The wireless charging task can be completed with the ground charging station when the battery is low. It solves the problems such as remote controller dependence, limited image transmission, inconvenient battery carrying, etc., which has greatly expanded the drone’s application. Participants use pad to send commands to the drone in Nanjing, China. The signals are transmitted through 4.5G and eventually accepted by drone. It can execute unlock, route flight and preset operations without remote controller. At the same time, videos shot by optical pod or infrared pod carried by drones, as well as battery, flight distance and other data can also be transmitted back to London through 4.5G. When the drone’s battery is low, it will alarm through the pad. Controllers can choose to land or charge autonomously. After receiving the autonomous charging instruction, the drone records the position of the breakout point, and then finds the nearest charging pile through the cloud system. It completes the autonomous route setting, and finally reaches the charging pile. With the precise landing of the drone, the ground charging pile also extends the charging head to complete the wireless charging. At this point, operators in London can remotely know the charging rate and battery information. After the completion of charging, the drone will take off automatically, and continue to operate according to the original recorded place. At present, with 4.5G technology, TopXGun can realize ultra long distance control and precise control. In future, with the development of 5G technology, networked drone era will come. The application of the drone will gradually expand in the transportation, logistics, security, protection and other fields, and eventually becomes the real "networked sky".
  4. 1.Advantages of Drones for Plant Protection.A.The lower pressure wind field makes the spraying effect better. B.The spraying efficiency is 30 times higher than that of artificial.C.Pesticide costs and labor costs are lower. D.The operation is safer and pesticide poisoning can be avoided. 2. General Configuration for Plant Protection DronesA.Flight PlatformFlight control system, Dynamical system, Drone frame, Signal transmission system, B.Minidisk Pesticide kitFlow control and monitoring system C.Ground Equipment Agricultural management systemSignal station Control equipment
  5. FCUThe optimization of the damping scheme can better adapt to the vibration of the plant protection drone, which can realize more stable and reliable flight. GMU1.GPSUpgrade the highly-gain antenna, improve the quality of star search, and effectively enhance the anti-interference performance. 2. Magnetic compass Anti-interference performance is enhanced, effectively guaranteeing the plant protection machine in the strong magnetic interference situation. PMU1.Enhancement in power supply capacity can work continuously under 3A and 5V. 2.Enhancement in anti-static ability can resist 8KV high voltage. 3.The power line is thicken, the installation is more firm, the conductive performance is stronger. 4. Update the ARS power module, with stronger anti surge and anti reverse function.LIU1.Anti-static ability increases, which can resist 10KV high voltage. 2. Waterproof, dust-proof, anti-corrosion function. For more details, please contact sales@topxgun.com.
  6. In the mouth of pioneer Zhang Yu, one of his frequently quoted words is "lucky"". During two years of entrepreneurship, he also admitted that the product development process is not plain sailing. They have once felt confused and sad when faced numerous problems.
  7. Flight controller itself is highly demanding of technology, which is the advantage of TopXGun. Unmanned aerial vehicle (UAV) is able to realize unmanned flight because of its "brain" - flight control system. It is precisely because of the flight controller, UAVs can complete automatic takeoff, automatic navigation, independent cruise, landing and a series of independent movements. In the early years of UAVs, the focus was mostly on how to realize stable take-off, how to fly higher and faster, and now it is more emphasis on intelligence, terminalization and clustering. UAVs are no longer just toy, but tools that can be used in a variety of scenarios. The UAV was able to have such a change, largely thanks to the development of flight control technology, and today we’d like to invite TopXGun who is focus on the flight controller to offer us new vision to the UAVs’ industrial application. Based on sufficient technology accumulation, access to UAV flight control market. "Dreams are like underwear. They must be there, but it's not appropriate to show them to others." CEO Zhang Yu said a word, very interesting, but enough to see the whole team are low-key and introverted, in the mean time, there is no lack of appropriate Internet genes. When talk to CTO Yin Liangliang, he said: "Low-key attitude has been the philosophy of our company. We, a UAV flight control research and solutions provider, have been endeavour to meet customer’s demand. To real solve the problem of customers can better create value for customers. To promote the progress of UAV industry, and promote the application of UAVs in various industries, has been our goal." Doing things in low-key, but the technology of TopXGun is not "low-key". The core team are from Nanjing University of Aeronautics and Astronautics, Beihang University and other aviation professional institutions and domestic research related to UAVs. With 10 years of industrial experience and product development capabilities, TopXGun has been engaged in research and development of military UAV. Before the venture, they have also participated in a variety of military UAV research and development, including fixed wing, helicopter and multi-rotor, and now is based on multi-rotor UAVs. CTO Yin Liangliang's answer is not surprising to the question why choose UAV as the venture field: "In 2013, domestic UAV began to develop rapidly. On the basis of previous technology, we began to enter the market for UAV flight controller." UAV flight control system and solutions provider Flight control technology is one of the core technologies of UAV, but many manufacturers did not fully grasp the technology, not because they do not want to do research, but most of them are limited to the weak accumulation of technology. Yin Liangliang added: "we were endeavour in the flight control field for many years, so that our accumulate mature technology solutions provide us the status of the third party to enter into the UAV market." "We are positioning ourselves as UAVs’ flight control system and UAVs solutions providers." He said, in the ecological UAV chain, we only do what we can do best to provide the most professional products and service. Considering market demand, we cooperates with customers to launch a complete industrial program in plant protection, security, patrol line, surveying and mapping, logistics and other applications." Any kind of product’s research and development, production, testing and sales will encounter various difficulties, not to mention the flight control system which demands of higher technical requirements. When talking to how to overcome the difficulties in the process of design and development of products, Yin Liangliang said: "Hovering, stability and anti-interference of UAV flight control system are the difficulties. We can solve these problems from two aspects: one is to fully understand the actual demands of customers, analyze and solve problems in practical applications. On the other hand, TopXGun itself in the flight control research has deep technical accumulation, and we will continue to increase investment in research and development, so that each iteration are tested and verified thoroughly." Combine flight controller and monitoring platform, solving illegal flight from the origin. When it comes to drones, they have to say the huge negative impact of illegal flight. Although the state has introduced the relevant UAV real name policy, which can serve as certain constraint, the policy "power" has yet to be strengthened. When talk to the "illegal flight" topic, Yin Liangliang said that only a standardized management can ensure the stable development of the UAV industry. He said: "we have been in response to industry call to fully cooperate with the competent authorities to formulate various standards and specifications. As a flight control research and development enterprise, we also have the responsibility and obligation to contribute our strength for the healthy and orderly development of the industry. At the beginning of the design, we have taken into account the supervision of the competent authorities’ docking platform. So that we can solve illegal flight from the origin through technical means of real-time control of drones."