pemase

Members
  • Posts

    9
  • Joined

  • Last visited

  • Days Won

    3

pemase last won the day on July 3 2020

pemase had the most liked content!

1 Follower

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

pemase's Achievements

Newbie

Newbie (1/14)

3

Reputation

  1. During some tests that we carried out autonomously of the mRo navigation systems, while we flew, the wind began to blow very hard and we decided to suspend the mission and land manually because the wind was increasing more and more and the gusts were erratic and unexpected. To end the day, during the final approach the pilot made some low passes to be able to take some pictures of the plane from very close. Once the photos we achieved and we saw the circumstances complicated by the wind and the difficult landing, as fun we challenge the pilot to land with aim. Due to the strong wind we couldn't land at the first attempt, so we had to abort the landing on several occasions repeating the same flight pattern. At some moments during the final approach phase, we switch to “Stabilized” flight mode to check the safety that the mRo autopilot (mRo x2.1-777) brings while corrects the plane banking very quickly. The video quality is not at all the best, because vibrations are shown on the camera and this is because it is mounted on a pan/tilt system. Best Regards Pedro Matabuena
  2. The mRo factory is in San Diego California, design and manufacture happens in same place. Yep, I´m working at mRobotics
  3. This is how you can learn at a glance the technical characteristics of the mRobotics family of autopilots and decide which device best suits your projects. The mRo autopilots are designed and manufactured to create the wide variety of platforms that the industry requires in different ways. They are designed to provide reliability for the quality of the components used and manufacturing process, versatility in their physical and logical interfaces and in some cases to offer logical security by encrypting the information processed by the autopilot itself. You can build custom cables yourself or with mRo help to optimize weight and space. It can easily adapt them to carrier boards to interconnect other devices in one piece. Download from here the Comparison Table of mRo Professional Autopilot Family. Best regards to all Ardupilot community Pedro Matabuena
  4. Thank you for the advice!... How can I edit to fix it? The correct link is this: https://store.mrobotics.io/mRo-Control-Zero-F7-p/mro-ctrl-zero-f7.htm Best, Pedro
  5. The new miniature high-end Autopilot designed for any type of unmanned vehicle. A high-performance autopilot, specially designed for advanced/professional users who require the best of the best with minimal space. The mRo Control Zero is a clean sheet design with triple IMU sensors. It is featuring the ICM-20948 9DOF (3-axis accelerometer, gyroscope, and magnetometer) which is based on the legendary, field-proven and fully supported MPU-9250 and the ICM20602 6DOF (3-axis accelerometer, gyroscope), both with several thousand hours of flying. Also, we squeezed in the new German-made Bosch BMI088 6DOF that features a proprietary internal vibration dampening system specially designed for aerial robotics. Together with the ICMs, this combination will ensure the best performance in all situations. The new included DPS310 barometer is more sensitive than the venerable MS5611 without the noise and light sensitivity. Built for Builders! Control Zero, in its core, is a universal development board! The mRo Control Zero comes fully supported by PX4[Coming soon] and Ardupilot. If you require further customization, the Control Zero will come with all the libraries and examples that will allow you to initialize and access all the board sensors and functions directly via our reference code. Yes, you will be able to create your custom software for this board in no time, no need to worry about initializing everything (We did it for you). The software is written in C and utilizes a free, easy to install Eclipse-based IDE and supplied by ST. All is included for free with the sole purpose of giving you access to learn, edit, and improve. Be sure to read and understand ST Hardware Abstraction Layer (HAL) license. But… Be aware of the “limitations” of C, any careless handling of a single byte can potentially provoke a buffer overflow (don’t worry, it won’t damage the board). But hey, This how we all learned at some point, right? The recommended IDE also supports C++ so that you can jump to objects anytime you wish to. Learn more about what is the mRo Control Zero Autopilot To Buy click here