Search the Community
Showing results for tags 'hybrid'.
At the moment drones could fly only several minutes, but imagine if you get hours and hours of flight time, imagine if you get 5 kg of payload, this will be useful for thousands of purposes, from delivering humanitarian aid to package delivery. Finally, we can get it. First hybrid system for drones was designed at NASA and it's really similar to what we are doing here (you can see the NASA system here: Basically, it's an alternator connected to a gas motor, it is very similar to the system that is improved in your car to keep the lights on, the difference is that it's thousand times lighter. This is the project of the generator The gas motor has a power of 3hp that is transmitted to a brushless sensored brushless motor, the current then passes through the diode bridge rectifier and a tension regulator, then charge the batteries. This generator can provide for 2Kw, this is enough to sustain the entire drone systems and lift also 5 Kg of additional payload If you want to stay informed about my project please sign in this newsletter: http://eepurl.com/cUJnJr
We finally have our hybrid UAV, the HY1000 Wheelbase: 1000mm No payload weight: 4.5kg (no fuel) Max take-off Weight: 10 kg Max speed: 10m/s Max flight time: Over 4 hours Voltage: 22V Generator output: 1 kw Generator weight: 1.6 kg Fuel tank: 1L (Customizable) Fuel consumption: 800g/H(Max) An internal combustion engine consumes gasoline and spins a generator to ensure a 22V output. Besides this, a 6S lipo battery package is also installed onboard to offer emergency back-up power for quick climbing and quick maneuvering. With 1kg payload, the flight time is more than 3 hours, and with 3kg payload like a high-end camera, the flight time will be still more than 1 hour. Check out it here: www.sandwichdrones.it Our hybrid drone is powered by the GS1000 Gas Generator This generator is suitable for UAV systems able to lift 1.6 kg plus the fuel weight, with a maximum power usage of 1KW. Fuel consumption: 800g/kwh Generator weight: 1600g Accessories weight: 150g (backup battery) Generator dimensions: 21 x 16 x 9 cm Can be mounted on standard 12 or 10 mm standard tubes for gymbal support or any other support on REQUEST. All our carbon fiber parts are CNC made. You can buy one from here https://sandwichdrones.it/products/gs-1000-hybrid-generator