Search the Community
Showing results for tags 'ipad'.
Found 3 results
Hi All, There have been a few posts here about tablets overheating when used with a DJI controller. I live in the Phoenix area and this has been a big problem for me. In temperatures above 85 degrees or so, my iPad would heat up after about 20 minutes and the video feed would get horrible - almost unworkable. I didn't know that the problem was my iPad overheating until my first one died. The battery expanded and popped the screen from the back. The folks at the Apple store told me it was from heat. They replaced my iPad (for $99) and a couple of days later I had another shoot. After 20 minutes I started having the problem with the video feed, then after about 40 minutes, the iPad showed an excessive heat warning and shut down. That's when I figured out that the video feed problem was from the heat. I switched out my iPad for my iPhone and kept filming, but my iPhone started to overheat too. I had already made all the recommended changes to settings to avoid overheating, so I needed another solution. What I came up with works great. I had a shoot a couple of days ago when it hit 120 degrees here in Phoenix (it was about 112 degrees at the time of my shoot), and the iPad stayed perfectly cool - no video feed problems whatsoever. There's a quick video that shows how it works. Below that are links for all the individual pieces that went into making it. I cut the aluminum sheet using a grinder and some metal shears, and then smoothed the edges with a Dremel. The rest is pretty self-explanatory. I just wanted to share this with everyone here. I'll try to answer any questions. Hope this helpful to someone. Video Link - https://vimeo.com/222775218/66e8436195 Pieces Hood - http://amzn.to/2tvX4z8 Aluminum Plate - https://thd.co/2tvUOaW Velcro - https://thd.co/2tvV9KZ Ice Packs - http://amzn.to/2tvIveS Chris