Landing with strong wind using mRo x2.1-777 [mRobotics]


Recommended Posts

During some tests that we carried out autonomously of the mRo navigation systems, while we flew, the wind began to blow very hard and we decided to suspend the mission and land manually because the wind was increasing more and more and the gusts were erratic and unexpected.

To end the day, during the final approach the pilot made some low passes to be able to take some pictures of the plane from very close. Once the photos we achieved and we saw the circumstances complicated by the wind and the difficult landing, as fun we challenge the pilot to land with aim.

Due to the strong wind we couldn't land at the first attempt, so we had to abort the landing on several occasions repeating the same flight pattern.

At some moments during the final approach phase, we switch to “Stabilized” flight mode to check the safety that the mRo autopilot (mRo x2.1-777) brings while corrects the plane banking very quickly.

The video quality is not at all the best, because vibrations are shown on the camera and this is because it is mounted on a pan/tilt system.

Best Regards

Pedro Matabuena

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.