Pixhawk dual operator GCS


Recommended Posts

Does anyone interested in Pixhawk dual operator(master-slave) GCS?

 

Parameter
Size: 218mmX106mmX32mm
Screen display: 5.5 inches, 1000cd/m², 1080P
Image transmission distance: FCC 20km; SRRC 12km Video transmission delay: 110ms minimum (screen display from input source to ground)
Sky side
Communication interface: Two-way Sbus, UART, HDMI, NET
Power input: 12V; XT30 interface
Video input: 720P@30fps; 1080P@30/60fps
Size: 64mmX89mmX22mm

微信图片_20201130143902.png

微信图片_20201130143957.png

微信图片_20201130144329.png

微信图片_20201130144343.png

Link to post
Share on other sites

What is / are the "NET" specifications? Cellular  LTE 4G / 5G with a 3G failover?

Is it via Dongle or Sim card insertion and is said "NET" communications  NTRIP Linkable and perhaps upgradeable for possible Remote ID UTM Transmission?

If so I would think there would be a market if Self manufactured (BUILT) systems would / will need to be classified and certified for flight on the UAV End.

I see Foxtech proffering similar range (Transmission and Control) systems with RTK type tracking as we continue to move into the unknow requirements of the future.

Edited by MedicFL1
Link to post
Share on other sites
4 hours ago, Av8Chuck said:

Are you manufacturing them?  Is this to compete with HereLink?

How much do you want for it?

We are the sole agent,herelink is another product,it doesn't have dual operator fuctions,and our product are much powerful,

I can email you the brochure and price

 

Link to post
Share on other sites
11 minutes ago, Nick Li said:

sent,from nick.li@mmcuav.com

Notuzi X85 looks like a familiar configuration any chance of Flexible  Payload configuration like the Zenmuse X5s  / Zenmuse Z30 and a Gimbaled Flir Vue Pro R

or are the payload connection interface proprietary as with DJI Enterprise?  Always nice to be able to use your existing cameras and lenses.
 

Link to post
Share on other sites
15 minutes ago, MedicFL1 said:

Notuzi X85 looks like a familiar configuration any chance of Flexible  Payload configuration like the Zenmuse X5s  / Zenmuse Z30 and a Gimbaled Flir Vue Pro R

or are the payload connection interface proprietary as with DJI Enterprise?  Always nice to be able to use your existing cameras and lenses.
 

Our payloads uses our proprietary 3-axis system, which can only fit pixhawk drones.

We have more than 40 payloads(with same connector) that can be used for a variety of applications.

IR/EO camera,night version camera,etc.

Catch458A(06-18-(12-18-15-08-34).jpg

Edited by Nick Li
Link to post
Share on other sites

Thanks for the email.

So because you seem to be exclusively Ardupilot/PX4 based can we communicate with your payloads via MAVLINK?  

Your pretty pricey compared to HERELink unless this includes two control panels.  I'm interested in talking to you about your products and potentially integrating them with our products.  IS this something you would be interested in? 

Link to post
Share on other sites
  • 2 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.